Best system for “Sophisticated” buildings

The KXZ product lineup has been extended to offer solutions delivering up to 60 horsepower when using a combinations of 3 outdoor units.

3 cu COMBINE.PNG

“Energy savings up to 34% with VTCC”

VTCC.PNG

Variable Temperature and Capacity Control

With VTCC technology, refrigerant temperature control during the condensation and evaporation phases in the refrigerant system ensures energy savings up to 34% in cooling mode during the partial loads, compared to the traditional VRF models.

HIGH EFFICIENCY IMPROVEMENT AEROSPACE CUTTING EDGE TECHNOLOGY

cwm.PNG

CONCENTRATED WINDING MOTOR

  • High performance CPU for precision optimization achiving high output and energy saving

VECTOR CONTRL.PNG

VECTOR CONTROL

  • Smooth sine voltage waveform operation from low to high speed

  • Energy efficiency further improved in low speed range

SERRATION.PNG

AERODYNAMIC SERRATED CUTTING EDGES

  • Adapted fan blade design from Mitsubishi Heavy Industries aerospace with increasing air volume with low power input

 

ERGONOMICS DESIGN FOR EASY MAINTENANCE

ERGONOMICS DESIGN.png

Quick and easy access to service parts with separation of compartments. Accessible panels has been made possible from both front and rear side, refining ergonomics and productivity of maintenance personnel.

 
BALANCE AIRFLOW.png

“WITH HIGH EFFICIENCY COMES WITH BALANCE AIRFLOW”

Uniform air flow through heat exchanger reduces unbalance air velocity increases effectiveness and performance of heat exchanger giving better efficiency on the system

BACKUP FUNCTION.png

“ALWAYS HAVE A BACKUP”

  • In the event of one compressor failure, the other compressor still operate with reduced capacity

  • In the event of one unit failure, the other units still operate, without affecting total operation of system

 
 

PRODUCTS LINE UP

FDC280~335KXZE1

  • Cooling Capacity: 10-12 HP

  • Power supply: 50Hz, 3 Phase 380 - 415V

  • Connect up to 29 indoor units / up to 130% capacity..

  • Total pipe length up to 1000m

  • Furthest indoor unit up to 160m

  • Exterior Dimension in mm (H x W x D): 1690 x 1350 x 720

  • Net Weight : 272 kg

  • Blue Fin Technology

 
FDC400KXZE1 CU.PNG

FDC400~560KXZE1

  • Cooling Capacity: 14-20 HP.

  • Power supply: 3 Phase 380-415Vac,50Hz

  • Connect up to 48 indoor units/up to 130% capacity..

  • Total pipe length up to 1000m.

  • Furthest indoor unit up to 160m.

  • Exterior Dimension (H x W x D): 2048 x 1350 x 720

  • Net Weight : 317-380 Kg

  • Blue Fin Technology